Check this Out
Posts by Corey Rasmussen
In this video, Corey calculates the forces on the gear teeth and compares spur gears to helical. See what happens…. https://youtu.be/kgKzmHMCifQ
An Easy Guide to Gear Design – Terminology, Meshing and Speed
In this video, Corey describes what is needed for gears to mesh properly, how to adjust backlash and how to calculate gear speeds. https://youtu.be/yTxKIC8wQsU Video Transcript Hi and...
How to Design a Simple Gear System – Common Gear Types and Tooth Profiles
In this video, Corey demonstrates different types of gears using Legos and what they are used for. He also details pressure angle and why that matters. https://youtu.be/Z2daX_Kj3Y8
This article is going to be a bit more technical than the previous article about fasteners, “The Magic of Fasteners.” I’m going to try to keep it as simple as I can, but this topic is so...
In this video, Corey demonstrates using the and, or, not, latch and reset configurations in ladder logic. https://youtu.be/Dj2w-Hlx09c
The log splitter that I own has two control valves on it. Both are tandem center and connected in series. I wanted to explain why this is a bad idea and should be avoided. Tandem...