Check this Out
Category: Stress Flow / Hand Calcs
In part 9 of this series, Corey demonstrates how calculations can be used to determine reactions. https://youtu.be/NooJANEOl6M
Log Splitter Series (Part 8): Mathematical Model of the Geometry
In part 8 of this series, Corey creates a mathematical model of the jib geometry using MathCAD. https://youtu.be/bdxxkJJ2c9s
Log Splitter Series (Part 7): Using the Law of Cosines to Determine Forces
In part 7 of this series, Corey shows how to use the Law of Cosines to determine the forces on the jib pivot pin and cylinder based on the cylinder length. https://youtu.be/0abxnjPDJOY
Log Splitter Series (Part 6): Free Body Diagram and Governing Equations
In part 6 of this series, Corey creates the Free Body Diagram and governing equations for the cylinder and jib. https://youtu.be/ya7uzhhlA08
Best Guide for Setting Up Cylinder Geometry for Articulation
In part 5 of this series, Corey shows how to layout cylinder geometry for the log splitter jib using Solidworks. He indicates the benefits of using this method and how easy it is to calculate the...
Log Splitter Series (Part 4): Axial, Bending, and Shear Stresses
In part 4 of this series, Corey shows how to combine axial, bending, and shear stresses of the main log splitter beam using Mohr’s Circle. He also give his thoughts on the design factor of the...