Calculators Archives - Page 2 of 2

This free beam calculator gives you the advantage to calculate a wide variety of beam types and loads. Add as many loads on a beam as you want. It automatically calculates shear load, moment and deflection. 6 Beam Types Cantilever Cantilever and Guided Simply Supported Fixed (Statically Indeterminate) Supported and Fixed (Statically Indeterminate) Simply Supported with Overhang 9 Load Types Point Loads Moment Loads On Span At End Distributed Loads Constant Increasing Decreasing Pyramid End Conditions: >CantileverCantilever/GuidedSimply SupportedFixedSupported/FixedSupported with Overhang Beam Length (in): Young's Modulus (ksi): Moment Of Inertia (in4): Load Case 1 Load Type: >NonePointConstant DistIncreasing DistDecreasing Dist Desc: Location(in)Shear(lb)Moment(in-lb)Deflection(in) 0.00 0 0 0.00 0.00 0 0 0.00 Load Case: 2 >0NonePointConstant DistIncreasing DistDecreasing Dist Totals Location(in)Shear(lb)Moment(in-lb)Deflection(in) 0.00 0 0 0.00 0.00 0 0 0.00 Notes: Downward applied loads and deflections are positive. Upward shear loads are positive. Concave moment results are positive. Yellow highlights are values of L/360 or greater. Red highlights are values of L/240 or greater. Combinations of load cases may cause the maximum deflection to occur in an unexpected location. Adding a low magnitude point load at multiple locations will allow you to find the maximum deflection

Mentored Engineer Durham, NC 27712 Phone: (919) 808-6276 Email: Contact Us	All content featured by the Mentored Engineer is for educational purposes. The Mentored Engineer does not practice engineering nor does it claim responsibility for designs based on content posted. It is the responsibility of the designer to check with local and state authorities and if necessary consult with a licensed professional engineer.
Terms and Conditions
Privacy Policy